Fast, easy and free

Create your website now

I create my website

Pneumatic Hydraulic Cylinder

Page 1

What Are The Different Uses Of Hydraulic And Pneumatic Cylinders?



A hydraulic and a pneumatic shock system has a very different damping system, you can tell this when you have experienced riding a bicycle before. The modern day shock system is based on the concept of a fluid or an air that dissipates the energy and vibration from the tire which has a direct contact with the road surface. The sliding piston setup coming from the hydraulic or pneumatic cylinders are the one that carries the shock impulse. The cylinder is either filled with air or fluid, depending on the type. Automobile suspensions and aircraft landing gear are just some of the endless uses of hydraulic or fabricacion de cilindros. Large industrial machinery, oil rigs, and other earth moving machinery also used the same system. In order to prevent excessive train movement, railway transport system also used the shock absorption system.


The damping effect of the damper system whether it is a hydraulic or pneumatic are the steel piston, piston rod, and the cylindrical barrel. The movement of compressed air or fluid through the cylinder is the one that pushes the piston up and down. The piston goes back to its original position due to the spring mechanism that is employed within the system. These system is the one that is called the single action cylinder. Single action cylinders have different types and these are pneumatic, electro-pneumatic, hydraulic , or electro huydraulic. When air is moving in two different ways, it is called double action cylinder. When you have a double action cylinder, you will have two ports and that is the outstroke and the in-stroke. To learn more about pneumatic hydraulic cylinder, you can visit


The pneumatic or hydraulic cylinder configuration and bore will depend on the industry that it is being used. The variation will vary from a single inch up to several feet. The power of the compressed air that is being used will also depend on the usage, it can be as low as a few pounds per square inch up to a hundred pounds which can move objects a thousand times heavier. The component of the steel rods are toughened alloy steel. The precision of the cylinder pipes prevents it from having any corrosion and have a longer life for the piston seals as well.


The valves inside the cilindros hidraulicos are the ones that maintain the pressure as well as the flow of air or fluid inside the hydraulic or pneumatic cylinder. Some pneumatic cylinder have sizes to up to 1000mm. If a hydraulic oil imposes extreme hazard, then that is the time they use this system. In automated train doors, the application of the hydraulic and pneumatic cylinders are also indispensable. By using sensors, these doors automatically shuts close or open. It is the action of the hydraulic or pneumatic cylinders that makes the operation smooth.